What are the reasons for the decrease in suction power during the use of industrial vacuum cleaners? The manufacturers of industrial vacuum cleaners will introduce the product features to everyone. Many users find that after purchasing a vacuum cleaner, the suction power decreases over time and becomes worse. Below, we will introduce the reasons for the weakened suction power of vacuum cleaners.

What are the reasons for the decrease in suction power during the use of industrial vacuum cleaners? The manufacturer of industrial vacuum cleaners introduces the product characteristics. Many users find that after purchasing a vacuum cleaner, the suction power decreases over time and becomes worse. Below, we will introduce the reasons for the weakened suction power of vacuum cleaners.

There are four reasons for the low suction power of industrial vacuum cleaners:

(1) The dust collection bucket is full. At this time, you need to clean the garbage inside the dust collection bucket. When the dust collection bucket is full, air does not flow, and the motor cannot generate new airflow, resulting in decreasing suction power. Therefore, it is important to regularly clean the garbage inside the dust collection bucket.

 

(2) The filter is clogged. The suction power of industrial vacuum cleaners relies on the filter to collect dust. A simple example is the mask you wear in the morning; if it gets a layer of mold, can you still breathe normally? The principle of the vacuum cleaner is similar. Over time, fine dust will adhere to the filter, causing the suction power to decrease. Therefore, it is necessary to regularly clean the fine dust on the filter.

(3) Insufficient suction due to poor sealing. The principle of industrial vacuum cleaners is to create a vacuum to generate suction. When there is a leak in one area, the suction power will decrease. You should carefully check and address the location of the leak, such as joints, hoses, or the vacuum cleaner lid, which may not be sealed properly. If one of the motors in a dual or triple motor system is not working, it can also lead to reduced suction.

(4) The vacuum cleaner hose is clogged. You should clear the hose to restore suction power.

The above is an introduction to the reasons for the weakened suction power of industrial vacuum cleaners. I hope this information is helpful to you. If you have any other questions, you can contact our customer service: 021-59506161.

Main uses of industrial vacuum cleaners:

Industrial vacuum cleaners are used to collect waste, filter and purify air, and clean the environment during industrial production processes. Industrial vacuum cleaners have advantages such as continuous use for 24 hours, strong suction power, large dust storage capacity, long service life, and high-temperature resistance.

Precautions for using industrial vacuum cleaners:

1. Before using an industrial vacuum cleaner, you should first read the user manual to understand the product characteristics and usage methods in detail to avoid safety accidents caused by improper use.

2. There are many types and models of industrial vacuum cleaners, so pay attention to the effectiveness and usage range of the vacuum cleaner to avoid damage to the equipment due to incorrect usage.

3. Pay attention to the diameter of the industrial vacuum cleaner during use to avoid blockage by the materials being sucked in.

4. When using the industrial vacuum cleaner for a long time, check the negative pressure gauge on the machine to avoid motor damage due to overload.

5. Pay attention to timely cleaning of dust and debris in the vacuum cleaner.

The above points are some common issues when using industrial vacuum cleaners. If you have any questions, you can contact customer service: 021-59506161.