The industrial vacuum cleaner (dust collector) specifically designed for laser cutting and welding is used to collect waste, filter and purify air, and perform environmental cleaning during industrial production. Industrial vacuum cleaners can absorb various types of metal, non-metal, oil, water, and other particulate contaminants and liquids, as well as toxic and harmful gases. In the laser cutting and welding industry, they can improve product quality by removing waste gas, welding slag, and iron dust. In the chemical industry, they can recover some expensive catalysts, and as an environmentally friendly device, industrial vacuum cleaners can effectively prevent some occupational diseases, such as pneumoconiosis in welders.

The working principle of the industrial vacuum cleaner specifically designed for laser cutting and welding: When the motor of the specialized industrial vacuum cleaner rotates, it creates a vacuum that directly sucks waste gas, welding slag, and iron dust into the dust collection bucket, with air moving downward, thus forming a series of spiral movements. The materials fall directly to the bottom of the dust collection bucket, while some fine dust is blocked by a high-efficiency filter, and then normal air is expelled through the exhaust outlet. This prevents excessive machine smoke, which can affect the working environment and quality.

All Naiko vacuum cleaners are general-purpose industrial vacuum cleaners (for dust and water) that are easy to operate: To ensure the vacuum cleaner lasts for more than three years, please pay attention to the following points:

1: Customers must use a dust filter bag when vacuuming (to reduce dust damage to the motor).

2: All Naiko vacuum cleaners have aesthetically pleasing stainless steel barrels (prohibit the entry of chemical liquids, acidic cleaning agents, and other liquids that can harm stainless steel).

3: Maintenance of the dust filter bag: When the dust filter bag reaches a certain level of dust, please remove it and clean it with the vacuum cleaner.

4. Check if the power cord and plug are damaged. After use, coil the power cord and hang it on the hook on the top cover of the machine.

5. After completing water suction work, check if the air inlet is blocked or has debris; otherwise, it needs to be cleaned. Check if the float is damaged.

6. Handle the machine gently; do not subject it to external impacts.

7. When cleaning the machine, please use a damp cloth with water or a neutral cleaning agent. The main machine head must not be immersed in water for cleaning, and do not use corrosive cleaning agents like gasoline or thinner, as this may cause the shell to crack.

8. Naiko machines are available in single-phase and three-phase models. The three-phase industrial vacuum cleaner uses a turbine motor and can operate continuously for 24 hours.

9. Long-term use of the vacuum cleaner may lead to a decrease in suction power due to clogging of the filter mesh. To prevent a decrease in suction power, the filter mesh and cloth bag should be regularly cleaned with water, dried in a cool place, and then reused to restore suction power.

10. If the main unit overheats, emits a burnt smell, or has abnormal vibrations and noises, it should be sent for repair immediately and not used forcefully.

11. Do not frequently bend the hose back and forth, and avoid excessive stretching and bending.