During processing, the workshop's grinding lathes, centering machines, and punching machines generate a large amount of iron filings and waste. If not cleaned in time, it not only becomes unsanitary but also affects normal work. So, what kind of vacuum cleaner should be used to suck up iron filings in the gaps of the lathe?

To effectively vacuum iron filings and other waste, the vacuum cleaner generally needs to meet the following points.

First, it must be suitable for the occasion; it cannot be a commercial vacuum cleaner but must be an industrial vacuum cleaner, as industrial vacuum cleaners are equipped with high-efficiency filters to prevent damage to the motor.

Secondly, the 380V wet and dry vacuum cleaner is highly recommended for its strong suction and large capacity. If the voltage does not allow, please also choose a 220V three-motor industrial vacuum cleaner to ensure sufficient suction.

Next, the vacuum cleaner's dustbin should be large enough and easy to clean.

Finally, consider the brand quality of the machine.

Based on the above points, Shanghai Naike recommends the following machines for you to choose from:

1. A100 series 100L stainless steel industrial vacuum cleaner.

This vacuum cleaner (220V) has a large capacity of 100L, manual dust shaking to clean the filter, and an upper and lower barrel design for easy cleaning. It has a maximum power of 3600W, allowing for long-term operation to meet your factory's requirements. Additionally, the vacuum cleaner frame is made of all stainless steel material, making it resistant to harsh factory environments. This is a purely industrial heavy-duty wet and dry vacuum cleaner that can suck dust, water, oil, iron filings, sand, gravel, glass fragments, and other substances. It can clean an area of 2400 square meters per hour, making it an ideal model for large or medium-sized factories, warehouses, or construction sites.

2. NT80 series 100L stainless steel industrial vacuum cleaner.

Using 380V three-phase voltage, this is one of the best-selling products in Shanghai Naike's industrial vacuum cleaner range, with power ranging from 2.2 to 7.5KW, a barrel capacity of 100L, standard 8-meter power cord, and equipped with a cyclone centrifugal system for continuous suction operation 24 hours a day. It features a quick separation barrel design that allows for easy assembly and disassembly with a gentle push. It can suck up iron filings, iron slag, welding slag, steel nails, broken glass, dust, impurities, and all non-flammable and non-explosive items with a diameter not exceeding 50MM discharged from mechanical and metal factories!