Dynamics

The industrial vacuum cleaner industry is currently in a stage of rapid development, with significant achievements in both technological innovation and market expansion. Here, we will capture cutting-edge industry trends, analyze market trends, interpret policy directions, explore potential opportunities, and provide you with professional, timely, and accurate consulting advice.

View more categories+
×

04-02

Usage methods and precautions for industrial vacuum cleaners.

1. Introduction This manual provides all the information for the use and maintenance of industrial vacuum cleaners. Only with proper use and maintenance can the machine work more durably and effectively.

03-16

What type of hose should be equipped with an industrial vacuum cleaner?

Industrial vacuum hoses are a type of high-tech product that has emerged alongside industrial vacuum cleaners in our world. They are a category of hoses, commonly made of PU material as well as PVC. So, what is a PU hose? Most people are likely familiar with PVC, so I won't elaborate on that. Additionally, what are the differences between PVC and PU industrial vacuum hoses? What are the advantages of industrial vacuum hoses?

12-18

Can a household vacuum cleaner suck up iron filings? What is the difference between a household vacuum cleaner and an industrial vacuum cleaner?

Can a household vacuum cleaner suck up iron filings? Before answering this question, let's first introduce the differences between household vacuum cleaners and industrial vacuum cleaners: 1. Power: Household vacuum cleaners have smaller motors and cannot pick up heavy objects, resulting in a shorter lifespan; 2. Filters: Household vacuum cleaners generally do not have filters, allowing fine dust to enter the motor, leading to a shorter usage time. Industrial vacuum cleaners are equipped with filtration systems that discharge fresh air and can be used for extended periods; 3. Capacity: Household vacuum cleaners typically have a capacity of 20L, while industrial ones are usually over 60L.

12-15

How to use an industrial vacuum cleaner for grinding machines? What is the price of an industrial vacuum cleaner for grinding machines?

1. When using the industrial vacuum cleaner for the first time, connect the hose so that dust can be directly sucked in. The hose must be tightly sealed; any gaps will affect the suction power. 2. Before the first operation, check if the screws, hose bundles, and door latch switches are loose. 3. If the suction power is weak, check if there are any blockages in the inlet and outlet ducts. 4. Due to the weight of iron powder, a high-power industrial vacuum cleaner requires a 380V power supply. It is essential to check if the wiring and electrical switches comply with regulations, if the power supply voltage is correct, and if the wiring is done correctly. 5. To ensure leakage protection, please check if the ground wire is properly connected. 6. Ensure that after starting, the machine runs without load for three minutes, and check if the fan's rotation direction matches the inlet of the blower. If there is backflow or weak suction, please swap any two of the three power wires. 7. During use, if you feel a decrease in suction power, please regularly clean the filter to shake off the dust from the filter bag to prevent motor damage. The cleaning frequency depends on the amount of dust. 8. When cleaning dust, the machine must be turned off. Pull out the collection bucket and then dump the dust. 9. Regularly clean the dust on the filter to prevent air blockages that reduce suction power, ensuring a flat and tight fit. Generally, the filter should be replaced approximately once a year.

How to use an industrial vacuum cleaner for grinding machines? What is the price of an industrial vacuum cleaner for grinding machines?

12-07

The dust removal principle of sawdust dust collection equipment in small furniture factories.

The sawdust dust collection equipment for small furniture factories relies on a negative pressure fan for power, with a power range from 2.5 to 5.5 KW. The adsorption rate can reach 95%, and the sawdust separation rate can reach 99.5%. The dust collection pipeline can ensure that all sawdust dust falls into the dust collection bucket below the filter. The filter is supported by a frame and made of special polyester material. The electronic dust remover can promptly clean the filter, extending the usage time and lifespan of the machine.

The dust removal principle of sawdust dust collection equipment in small furniture factories.

12-07

What are the requirements for furniture factories to rectify during environmental inspections?

The environmental protection department stated that in order to strictly control air pollution caused by PM2.5, PM10, TSP, and other pollutants during furniture production, the regulation of air pollutant emissions in the furniture manufacturing industry is a key focus for pollution prevention and control. Comprehensive inspections are being conducted, ensuring that no corner or detail is overlooked during the investigation.

What are the requirements for furniture factories to rectify during environmental inspections?
< 12 >